14/09/2011 - 04:00 am

Electric-Hydraulic Scissor Lift Table

Herkules Equipment Corp., Walled Lake, Mich., has designed and manufactured an electric-hydraulic scissor lift table, with a 10,000 pound capacity, for General Electric’s Oil and Gas Division. The heavy duty lift system is designed for improving ergonomic conditions in a demanding environment. The lift is used for positioning oil pipes into a welding cell. The electric-hydraulic scissor lift table has a lowered height of 16 inches with 30 inches of travel, a 48 x 96-inch platform, and high strength, thick, tubular steel scissors.

The simple push button up/down control pedestal also contains the external power unit, enabling the lift table with large, heavy duty cylinders, to have a lower closed height. A check valve is included within the high-pressure gear pump head which allows the operator to stop and hold the lift system at any position during normal operation. The motor is 230VAC, 3HP, 60 Hz, 3 phase, NEMA-4 rating.

A unidirectional flow control is included as a secondary safety measure in case a hydraulic line is accidentally cut.  

EnKon Systems is the brand name for Herkules Equipment Corporation’s electric, hydraulic and air powered scissor lift table systems.


New Issue

LHI September 2022

In this month's issue